Miele K 1813 Vi Instalační manuál

Operating and Installation InstructionsRefrigeratorTo prevent accidents and appliance damage read these instructionsbefore installation or use.M.-Nr.

Using the settingsThis appliance is operated with the useof touch keys activated by a finger.–An available button will appear white.–A selected button

Custom settingsIn the custom settings mode you canselect and change functions. Thefunction possibilities are described inthe respective chapters of th

^By touching the X button, you canchoose between:= 0 : Button sound is off= 1 : Button sound is on= – : Return to menu.^Touch the access button "

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or an opendoor.The alarm sy

Setting the temperature in therefrigerator^Touch the access button "p"soitturns yellow.^Touch the sensor button for therefrigerator so it tu

Temperature unit(Fahrenheit/Celsius)The temperature can be displayed indegrees Fahrenheit (°F) or Celsius (°C).^Touch the access button "p"s

The SmartFresh drawers provide theright combination of temperature andhumidity. The result is freshness up tothree times longer than in the otherzones

Tips for storing food in theSmartFresh drawersFor optimal storage conditions, it isalways best to store similar foodstogether in one drawer.The upper

Different storage zonesDue to the natural circulation of air inthe appliance, there are differenttemperature zones in the refrigerator.Cold, heavy air

When the SuperCool function isactivated, the appliance is cooled ascold and quickly as possible (to afactory-preset temperature).The SuperCool functio

IMPORTANT SAFETY INSTRUCTIONS...4Guide to the refrigerator ...7Before use ...

Refrigerator and SmartFreshdrawersThe refrigerator and SmartFreshdrawers defrost automatically.During normal operation, condensateand frost can form o

Moving the shelvesThe shelves can be adjusted accordingto the height of the food.^Using both hands, grasp the shelffrom underneath and lift slightly s

SmartFresh drawerThese drawers are set on telescopictracks. They can be pulled in and outfor loading and unloading, or removedfor cleaning.^ Open the

Adjusting the door shelvesFor easier loading, unloading, andcleaning, the door shelves can beshifted or completely removed.^ Using both hands, grasp t

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unp

Before cleaning^Use the main switch to turn theappliance off completely.The main switch is located on theright-side underneath the control panel.^Unpl

Humidity filtersThe two humidity filters, located abovethe SmartFresh drawers, must beremoved for cleaning.^Remove the SmartFresh drawer.^ Unhook the

Ventilation slits^Check the ventilation slits in the basepanel regularly. Remove any dirt/dustwith a vacuum cleaner or brush.Clean as needed.Door seal

Changing the light bulbThe lighting automatically switches offafter the door has been open forapprox. 5 minutes. This is not a fault.After the bulb ha

Side lighting^Turn the light cover counterclockwiseand pull out.Never touch a halogen bulb withbare fingers.When inserting a glass halogenbulb, always

Installation ...37Climate Range ...37Installation

With the aid of the following guide minor problems can be corrected without a ser-vice call.Repairs should only be carried out by a qualified and trai

Issue Possible fault SolutionThe compressor kickson very frequently andfor too long.The ventilation slits arecovered or dusty.Clean with a vacuum orbr

Normal noises What causes them?Brrrrr... A humming noise is made by the motor (compressor). Thisnoise can get louder for brief periods when the motors

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

34

Installation InstructionsInformation is subject to change. Please refer to our website to obtain the mostcurrent product specification, technical &

Disposing of the packagingmaterialsThe packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are

Have the appliance installed by aqualified technician, according tothe enclosed installationinstructions.WARNINGThis appliance is top-heavy andmust be

Important! When there is highhumidity a build-up of condensationon the outer surfaces of theappliance can occur.This can causethe surfaces to corrode.

BaseA fully loaded appliance is very heavy.The load-bearing capacity of your floormust meet the following requirements:K 18x3 Vi ...996lbs(452

When using the appliance, followbasic safety precautions, includingthe following:Read all instructions beforeinstallation and use to preventaccidents

Stainless steel panelsStainless steel door panels and toe-kickcovers are available from Miele.Custom door panelsThis appliance is compatible with alls

Installation with partition using the"Merging Kit"The minimum thickness of the partitionis5/8" (16 mm).If there is a partition with a t

Adjusting the door openingangle (optional accessory)Depending on the installation site, itmay be necessary to adjust the dooropening angle to 90°.^Ope

Door dimensions (open min. 90°)*The dimensions of the door fronts andhandles will vary according to eachindividual kitchen.3/8" (10 mm)ABCK 18X3

Niche dimensionsNiche width (A)K 18X3 Vi 30" (762 mm)K 19X3 Vi 36" (915 mm)Dimensions44

Power supply1. Power supplyAK 18X3 Vi 15" (381 mm)K 19X3 Vi 18" (458 mm),Power bars or extension cordsare not safe (risk of fire). Do not us

Door front dimensionsABK 18X3 Vi 791/8"(2029 mm)293/4"(756 mm)K 19X3 Vi 791/8"(2029 mm)353/4"(908 mm)4" - 5 3/16" (102 -

Before you beginRead these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed instal

Aligning the housing unitThe housing unit must be carefullyaligned using a spirit level beforeinstalling the appliance. The unitcorners must be at rig

^ Do not remove the installationsupports from the appliance door.They will be used later in theinstallation niche.There are transportation safetydevic

InstallationThis appliance is top-heavy andmust be secured to prevent thepossibility of tipping forward.Keep the door closed until theappliance is com

^Unscrew the screws a on the coverb and pull off the sticker c.^Remove the cover b.^ Push the module into the slot until itlocks into place.^ Connect

Mounting AccessoriesThe mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are i

^Now attach the installation niche tothe wall.The built-in cabinet must be secured tothe wall behind it with several screws.In a cabinet with a back w

Securing an alternative anti-tipdeviceIf the anti-tip brackets cannot beattached securely, an alternativeanti-tip device can be used.Ensure that there

Sliding the appliance into theinstallation spaceIf a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Man

Aligning the appliance^Align the appliance with the customfront.The installation aids c on theappliance door have been designed forcustom door thickne

Attaching the appliance to theinstallation niche^ Screw the attachment plate lugs f tothe overhead furniture/fixtures.If there is no way to attach the

For a side-by-side combination the fillerstrips from both appliances are puttogether to form one long filler strip:^Take the peg from the "side-b

Preparing the custom door^Open the appliance door.^Unscrew the installation supports lfrom the appliance door.^ Loosen the remaining screws fromthe st

^ Mark the distance X on the back-sideof the custom door.^ Also calculate and mark the center ofthe custom door Y.^ Remove the mounting frame from the

~Do not block the ventilation gaps inthe plinth or the top of the appliancehousing unit, as this can impair theefficiency of the appliance, increase t

Attaching and aligning thecustom door front^ Open the door and hang the customdoor with the mounting frame overthe threaded bolts n.^ Put the side str

Attaching the fixing brackets(Only for appliances using the "Frontpanel gap kit".)The fixing brackets are used to securethe custom door fron

^ Insert the cover strip into the spacebetween the appliance and thewooden panel.For side-by-side combinations, thecover strips (on both sides of thea

^Remove the foil from the adhesivestrips.^Attach the toe-kick cover to theplinth.Mounting the air separatorThe air separator keeps the supply andexhau

,Avoid the risk of electricalshock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension

Miele's RemoteVision Wi-Fi technologycreates a 'virtual link' between yourappliance and our monitoring center. Ifa fault occurs, Miele&

Accessing the RemoteVisioncontrol panel^Touch the access button "p"soitturns yellow.^Note the position of the X button, butdo not touch.^Tou

MasterCool control panel options for RemoteVisionStatus indicators Description of functionFlashing ; ~ Module booting phaseFlashing ; ‡ Not connected

68

69

a Hinged door shelfb Shelves (height adjustable)c Door shelves (height adjustable)d Deli drawere Control panelf Main switchg Humidity filtersh SmartFr

70

71

M.-Nr. 09 920 570 / 00en - US, CAK 1803 Vi, K 1813 ViK 1903 Vi, K 1913 Vi

Control panela Access button "p"activates the control panelb Refrigeratorc Upper SmartFresh drawerd Lower SmartFresh drawere Temperature dis

Before using for the first time^Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a