Miele KM 491 Provozní pokyny stáhnout pdf (Strana 30)

The exact positions of the spring

clamps and the support bars (for

beveled cooktops only) are shown in

the "Installation dimensions" of each

unit.

Facet cooktops:

A special sealing strip ensures the

slip-proof seating of the cooktop in

the cutout. The gap between the

frame and the countertop will narrow

after a little time has passed.

^

Create the countertop cutout as

shown in the "Installation

dimensions". Observe the safety

distances (see "Installation Safety

Instructions").

Wood or solid surface countertop

^

Seal the cut surfaces with a suitable

sealant to avoid swelling caused by

moisture.

The materials used must be heat

resistant.

Ensure that these materials do not

get on the top surface of the

countertop panels.

^

Position the spring clips and the

securing strips (supplied with the

appliance; only for facet cooktops)

on the top edge of the cut-out

^

Attach the spring clips a and the

securing strips b with the

3.5 x 25 mm wood screws (supplied).

Installation

30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Komentáře k této Příručce

Žádné komentáře