Miele KF 1813 Vi Instalační manuál

Operating and Installation InstructionsFridge-Freezer CombinationTo prevent accidents and appliance damage read these instructionsbefore installation

Before using for the first time^Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a

Using the settingsThis appliance is operated with the useof touch keys activated by a finger.–An available button will appear white.–A selected button

Custom settingsIn the custom settings mode you canselect and change functions. Thefunction possibilities are described inthe respective chapters of th

^By touching the X button, you canchoose between:= 0 : Button sound is off= 1 : Button sound is on= – : Return to menu.^Touch the access button "

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or open doors.The alarm sys

Setting the temperature in therefrigerator and freezersectionsThe refrigerator and freezer sectionscan be set independently of each other.^Touch the a

Temperature unit(Fahrenheit/Celsius)The temperature can be displayed indegrees Fahrenheit (°F) or Celsius (°C).^Touch the access button "p"s

The SmartFresh drawers provide theright combination of temperature andhumidity. The result is freshness up tothree times longer than in the otherzones

For optimal storage conditions, it isalways best to store similar foodstogether in one crisper.Foods that are best stored under dryconditions–fresh fi

If you are not satisfied with yourstored food (for example the foodwilts or becomes withered after onlya short storage time), check thefollowing again

IMPORTANT SAFETY INSTRUCTIONS...4Guide to the Fridge-Freezer combination ...8Before use ...

Different storage zonesDue to the natural circulation of air inthe appliance, there are differenttemperature zones in the refrigerator.Cold, heavy air

Freezing foodFresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the

DefrostingFrozen food can be defrosted indifferent ways:–in a microwave oven,–at room temperature,–in the refrigerator (the cold given offby the froze

When the SuperCool function isactivated, the appliance is cooled asquickly as possible (to a factory-presettemperature).SuperCoolWhen used with the re

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing".Turning on the ice cube maker^M

Refrigerator section andSmartFresh drawersThe refrigerator and SmartFreshdrawers defrost automatically.During normal operation, condensateand frost ca

Moving the shelvesThe shelves can be adjusted accordingto the height of the food.^Using both hands, grasp the shelffrom underneath and lift slightly s

The divider in the drawer can also beremoved for cleaning.^Remove the drawer.^Lift the divider upward and out.To re-insert the divider, slide it backd

Adjusting the door shelvesFor easier loading, unloading, andcleaning, the door shelves can beshifted or completely removed.^ Using both hands, grasp t

Ice cube containerThe ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning.^Slide the container forwar

Water filter ...35Water filter change indicator ...35Exchangi

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unp

Before cleaning^Use the main switch to turn theappliance off completely.The main switch is located on the rightside underneath the control panel.^Unpl

Humidity filtersThe two humidity filters, located abovethe SmartFresh drawers, must beremoved for cleaning.^ Remove the SmartFresh drawer.^ Unhook the

After cleaning^Return all shelves and accessories.^Place food back in the refrigeratorsection, close the appliance doors,insert the plug in the power

Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways hold it with a soft cloth.^ Remove the defective light bulb.^ Pl

The appliance is supplied with anactive charcoal filter which improvesthe taste and smell of ice cubes byremoving chlorine and othersubstances from th

Exchanging the water filterNote: Air trapped in the system maycause water and the filter cartridgeto eject forcefully. Use caution whenremoving.^ Push

^After the filter change the filterindicator in the display still flashes.The change must be be confirmed inthe electronic.Confirming the filter chang

Water filter38State of CaliforniaDepartment of Public HealthWater Treatment DeviceCertificate NumberDate Issued: March 10, 2006Trademark/ModelDesigna

Water filter39To a capacity of 739.68 gallons (2800 liters).* Based on the use of Cryptosporium parvum oocystsPerformance Data Sheet For Filter Model

When using the appliance, followbasic safety precautions, includingthe following:Read all instructions beforeinstallation and use to preventaccidents

This product KF 1803 Vi, KF 1813 Vi (KIMBM30US) / KF 1903 Vi, KF 1913 Vi(KIMBM36US) is tested and certified by WQA against ORD0902 for California"

With the aid of the following guide minor problems can be corrected without a ser-vice call.Repairs should only be carried out by a qualified and trai

Problems with temperatureIssue Possible fault SolutionThe freezer section istoo warm.The room temperature islower than the ambienttemperature for whic

General problemsIssue Possible fault SolutionWater is flowing out ofthe appliance.Close the shut-off valve immediately.Check whether the waterpipe in

Alarm / Indicator warningsIssue Possible fault SolutionThe alarm is ringing. The appliance door(s)have been open forlonger than 5 minutes.Close the do

Problems with the ice makerIssue Possible fault SolutionThe ice cube makerwill not switch on.The appliance is notplugged in.Check that the applianceis

Problems with the ice makerIssue Possible fault SolutionThe ice cubes aresmall.Other domestic appliancesthat use water are inoperation.Avoid using suc

Problems with the ice makerIssue Possible fault SolutionThe ice maker is notproducing enough iceor the ice cubes aremisshapen.Check the waterpressure.

Normal noises What causes themBrrrrr... This noise may get louder for brief periods when the motorkicks on.Blub, blub... A gurgling noise can be hear

In the event of a fault which you cannotcorrect yourself, please contact–your Miele dealeror–Miele Technical Service.See back cover of the this manual

InstallationThis appliance is top-heavy andmust be secured to prevent thepossibility of tipping forward.Keep the doors closed until theappliance is co

50

Installation InstructionsInformation is subject to change. Please refer to our website to obtain the mostcurrent product specification, technical &

Disposing of the packagingmaterialsThe packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are

Have the appliance installed by aqualified technician, according tothe enclosed installationinstructions.,WARNINGThis appliance is top-heavy andmust b

Important! When there is highhumidity a build-up of condensationon the outer surfaces of theappliance can occur.This can causethe surfaces to corrode.

BaseA fully loaded appliance is very heavy.The load-bearing capacity of your floormust meet the following requirements:KF 18X3 Vi ...950lbs(431

Stainless steel panelsStainless steel door panels and toe-kickcovers are available from Miele.Custom door panelsThis appliance is compatible with alls

Installation with partition using the"Merging Kit"The minimum thickness of the partitionis5/8" (16 mm).If there is a partition with a t

Adjusting the door openingangle (optional accessory)Depending on the installation site, itmay be necessary to adjust the dooropening angle to 90°.^Ope

Door dimensions (opening angle 90°)*The dimensions of the door frontsand handles will vary according toeach individual kitchen.3/8" (10 mm)ABCKF

~After your appliance is in operation,do not touch the cold surfaces in themachine, ice cubes or frozen food,particularly when hands are damp orwet. S

Niche dimensionsNiche width (A)KF 1803 Vi, KF 1813 Vi 30" (762 mm)KF 1903 Vi, KF 1913 Vi 36" (915 mm)Dimensions60

Power supply and water connection1. Power supply2. Water connectionAKF 18X3 Vi 15" (381 mm)KF 19X3 Vi 18" (458 mm)Install a pressure limitin

Door front dimensionsABCKF 18X3 Vi 535/16"1354 mm2913/16"758mm267/16"672mmKF 19X3 Vi 535/16"1354 mm353/4"908mm267/16"672

Before you beginRead these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed instal

Aligning the housing unitThe housing unit must be carefullyaligned using a spirit level beforeinstalling the appliance. The unitcorners must be at rig

^Do not remove the installationsupports from the appliance doors.They will be used later in theinstallation niche.There are transportation safetydevic

^Remove the cover b.^Push the module into the slot until itlocks into place.^Connect the appliance to the powersupply and turn it on. After severalsec

Mounting AccessoriesThe mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are i

^Now attach the installation niche tothe wall.Securing an alternative anti-tipdeviceIf the anti-tip brackets cannot beattached securely, an alternativ

Sliding the appliance into theinstallation nicheIf a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Man

Disposal of your old appliance~Before disposing of an oldappliance, first make the door latch orlock unusable.~Take off the doors.~Leave the shelves i

Aligning the appliance^Align the appliance with the customfront.The installation aids c on theappliance door have been designed forthe following custo

Note:–The adjustment of the rear feet isaided if the appliance is lifted at therear (tipped forward slightly).Attaching the appliance to theinstallati

^Insert the filler strip until you hear itclick into place j.For a side-by-side combination the fillerstrips from both appliances are puttogether to f

Now connect the water supply to theappliance (see "Plumbing").Preparing the custom doorFor best results, it is important tomount the upper d

^ Mark the distance X on the back-sideof the custom door.^ Also calculate and mark the center ofthe custom door Y.^ Remove the mounting frame from the

Attaching and aligning thecustom door front^ Open the door and hang the customdoor with the mounting frame overthe threaded bolts n.^ Put the side str

Note the size of the upper custom doorfront:^ Measure the distance Y between theadjusting rail from the lower door andthe upper door.^ Be sure to leav

Attaching the covers^ To mount the cover strips on bothsides of the upper and lower doors,click them into place from bottom totop, into the gap betwee

^Insert the cover plate on the freezercompartment door.Attaching the toe-kick coverThe maximum height of the toe-kickcover is 4" (101 mm) from th

Mounting the air separatorThe air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, opti

a Hinged door shelfb Shelves (height adjustable)c Door shelves (height adjustable)d Floating drawere Control panelf Humidity filterg Main switch to tu

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations.Dis

Preparing the water connectionThe connection to the householdwater supply must be installedbefore the appliance is installed.^Turn off the main water

Connecting the water supplyWhen connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of

,Avoid the risk of electricalshock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension

Miele's RemoteVision Wi-Fi technologycreates a 'virtual link' between yourappliance and our monitoring center. Ifa fault occurs, Miele&

Accessing the RemoteVisioncontrol panel^Touch the access button "p"soitturns yellow.^Note the position of the X button, butdo not touch.^Tou

MasterCool control panel options for RemoteVisionStatus indicators Description of functionFlashing ; ~ Module booting phaseFlashing ; ‡ Not connected

87

M.-Nr. 09 920 660 / 02en - US, CAKF 1803 ViKF 1813 ViKF 1903 ViKF 1913 Vi

Control panela Access button "p"activates the control panelb Refrigeratorc Left SmartFresh drawerd Right SmartFresh drawere Freezerf Tempera