Miele H 370 Technické informace

Novotronic Models Technical Information 1 TECHNICAL INFORMATION H350, H373 &H387 Ovens © 2004 Miele

Novotronic Models Technical Information 10 2.1 Electrical Information Power Requirements: 120/208-240 VAC, 60 Hz, 30 Amp breaker**

Novotronic Models Technical Information 100 6.4.9 Clock Display - Settings Initial Requirements Turn the selector switch to "0"

Novotronic Models Technical Information 101 6.4.10 Buzzer - Settings Standard setting buzzer on. At the end of a cooking cycle an audible

Novotronic Models Technical Information 102 6.4.11 Buzzer Off At the end of a cooking cycle there is no audible signal Initial Requirements

Novotronic Models Technical Information 11 3.0 Commissioning and Operation 3.1 Before using for the first time New ovens may have a sl

Novotronic Models Technical Information 12 3.2 Controls-Basic Overview The oven controls consist of the program selector and push buttons. The

Novotronic Models Technical Information 13 Controls-Basic Overview (Continued) Time/Temperature button All time and temperature selection

Novotronic Models Technical Information 14 3.3 Using The Oven 3.3.1 Cooking Using Default Temperatures Turn the program selector

Novotronic Models Technical Information 15 3.4 Rapid Heat The rapid heat feature activates the heating elements at maximum power to he

Novotronic Models Technical Information 16 3.4.2 Selector Switch Convection: Convection heating element and convection fan are activated In

Novotronic Models Technical Information 17 4.0 Function and Description Figure 4-1: Cooling and Venting Air Paths – Novatronic Ovens H350

Novotronic Models Technical Information 18 Cooling Air Intake Path 1. Refer to Figure 4-1 2. Via the deflector strips (3) 3. Via the air

Novotronic Models Technical Information 19 4.1 Catalyser System (H387 Models) Figure 4-2: Cooling and Venting Air Paths – Novatronic Ovens

Novotronic Models Technical Information 2 Table of Contents – H350, H373 & H387 Ovens 010 – Construction and Design 1 Unit Overview H350

Novotronic Models Technical Information 20 4.1.2 Pyrolitic or Self-Cleaning (H387 Models) The Miele pyrolitic or self-cleaning system is a the

Novotronic Models Technical Information 21 Figure 4-4: Maximum Duration With Heavy Oven Soiling, Gentle Start A Oven temperature

Novotronic Models Technical Information 22 4.1.3 Catalyser (H387 Models) Figure 4-5: Catalyser 1. Pyro

Novotronic Models Technical Information 23 Figure 4-6: Catalyser Assembly – Components (H387) 1. PT 1000 Sensor 2. Insulating Cover 3. In

Novotronic Models Technical Information 24 Figure 4-7: Door Lock Mechanism 1. Drive Locking Devi

Novotronic Models Technical Information 25 4.1.4 Safety Cut-Out After a predetermined period of time passes, based upon the operating mo

Novotronic Models Technical Information 26 4.1.6 Door Switch If the door of the oven is opened during cooking, the door switch sends a si

Novotronic Models Technical Information 27 4.1.10 Control And Power Electronic Unit On this appliance the control and power electronics are

Novotronic Models Technical Information 28 This page intentionally left blank

Novotronic Models Technical Information 29 5.0 Service And Maintenance 5.1 Lay Out Of Electrical Components H-350 Layout Figure 5-1:

Novotronic Models Technical Information 3 Table of Contents – Continued 050 – Service and Maintenance 1 Layout of Electrical Compo

Novotronic Models Technical Information 30 H-373 Layout Figure 5-2: H-373 Overview 1. Lamp 22. Switch Pyrolitic 2. Heater Element,

Novotronic Models Technical Information 31 H-387 Layout Figure 5-3: H-387 Overview 1. Lamp 17. Temp Sensor C

Novotronic Models Technical Information 32 Figure 5-4: Inner Cabinet Components (Non-Pyrolitic or Self-Clean Model Shown) 1. Reflector 2. Glas

Novotronic Models Technical Information 33 Figure 5-5: Heating Components Layout 1. Motor, Rotisserie 2. Motor, Convection Fan 3. Temp

Novotronic Models Technical Information 34 5.2 Door - Removal Note It is advisable to remove any drawer or front panel that may be fitt

Novotronic Models Technical Information 35 5.3 Oven – Removal Note It is advisable to remove any drawer or front panel that may be

Novotronic Models Technical Information 36 Figure 5-9: Removing the Fascia Panel 5.6 Control Module - Removal 1. Perform door removal pr

Novotronic Models Technical Information 37 Warning! To avoid the risk of damage don’t touch any components on the electronic unit Note To a

Novotronic Models Technical Information 38 Figure 5-10: Deflector Strip Front Mounting Screws 4. Remove the appropriate screws from the

Novotronic Models Technical Information 39 5.12 Left Or Right Door Hinge Bearing - Removal 1. Perform door removal procedure 2. Perform o

Novotronic Models Technical Information 4 Table of Contents – Continued 060 – Fault Diagnosis 1 Service Modes

Novotronic Models Technical Information 40 5.13 Cleanglass Door Panel -Removal 1. Perform door removal procedure 2. Remove the screws F

Novotronic Models Technical Information 41 5.14 Middle Door Glass - Removal 1. Perform door removal procedure 2. Perform the CleanGlas

Novotronic Models Technical Information 42 Shelf Runner - Removal (continued) 3. Remove the shelf runner Figure 5-16: Removing the Shel

Novotronic Models Technical Information 43 5.19 Cavity Rear Panel - Removal 1. Perform door removal procedure 2. Perform shelf runn

Novotronic Models Technical Information 44 Upper Heater Element - Removal (continued) Figure 5-19: Rear View of Oven (H3

Novotronic Models Technical Information 45 Figure 5-21: Removing the Upper Heating Element Note: When installing the temperatur

Novotronic Models Technical Information 46 5.23 Temperature Regulator – Removal 1. Perform door removal procedure 2. Perform oven removal 3

Novotronic Models Technical Information 47 5.24 Convection Heating Element - Removal 1. Perform door removal procedure 2. Perform ov

Novotronic Models Technical Information 48 5.25 Convection Heating Fan - Removal 1. Perform door removal procedure 2. Perform oven remov

Novotronic Models Technical Information 49 5.28 Catalyser - Removal (Pyrolytic/Self-Cleaning Models) 1. Perform door removal procedure 2.

Novotronic Models Technical Information 5 1.0 Construction and Design 1.1 Unit Overview – H 350 1. Program Selector 7.

Novotronic Models Technical Information 50 5.30 Door Latch - Release (Pyrolytic/Self-Cleaning Models) 1. Perform door removal procedure 2.

Novotronic Models Technical Information 51 5.32 Door Switch - Removal 1. Perform door removal procedure 2. Perform oven removal 3. Per

Novotronic Models Technical Information 52 5.34 Temperature Regulator - Removal (Pyrolytic/Self-Cleaning Models) 1. Perform door removal proced

Novotronic Models Technical Information 53 5.35 Door Lock Manual Override Danger! Risk of burning! Only override the door lock after the ap

Novotronic Models Technical Information 54 This page intentionally left blank

Novotronic Models Technical Information 55 6.0 Fault Diagnosis 6.1 Service Modes Initial requirements Turn the selector switch to “O” Ac

Novotronic Models Technical Information 56 Position Display Machine Response 0 --00 None 1 e.g. H 01 Programmed model variant displayed see

Novotronic Models Technical Information 57 28 e.g. 0045 Operating hours for Convection Heating 29 e.g. 0009 Operating hours for Grill 1 and

Novotronic Models Technical Information 58 6.2.3 Fault Code F5 Cause Oven PTC temperature short-circuited Remedy Replace the PTC sensor 6.2

Novotronic Models Technical Information 59 6.2.6 Fault Code F13 Cause: The door-locking device (Pyrolitic) does not close because its dr

Novotronic Models Technical Information 6 1.2 Unit Overview – H 373, H387 1. Program Selector 2. Oven Display and Push

Novotronic Models Technical Information 60 Fault Code F14 (Continued) Cause: The door-locking device (Pyrolitic) does not close because the

Novotronic Models Technical Information 61 6.2.9 Fault Code F16 Cause Identity lost, programmed model variant has been deleted Remed

Novotronic Models Technical Information 62 6.3 Fault Repair 6.3.1 Excessive Noise During Convection Fan Operation Cause Convection he

Novotronic Models Technical Information 63 6.3.2 Selected Temperature Exceeded Symptom The unit heats up to a higher temperature th

Novotronic Models Technical Information 64 6.3.3 Excessive Noise During Cooling Fan Operation Symptom Loud operational noises with 22

Novotronic Models Technical Information 65 6.3.5 Misting Behind Display Symptom The timer and digital display are misted up on the

Novotronic Models Technical Information 66 6.3.6 Unit - Does Not Heat Symptom The oven does not heat up and the fan doesn’t operate

Novotronic Models Technical Information 67 6.3.7 Self Cleaning (Pyrolitic Mode) Can’t Be Switched Off Symptom After pyrolitic clea

Novotronic Models Technical Information 68 6.3.8 Model Number, Operating Parameter and Frequency Supply Voltage Programming To avoid incorrec

Novotronic Models Technical Information 69 Model Programmed Value Models H 01 H 370, H 373 H 02 N/A H 03 N/A H 04 H 387 H 05 B 2 top ove

Novotronic Models Technical Information 7 1.3 Data Tag Location The Data Tag is located on the bottom right edge of the front of the oven

Novotronic Models Technical Information 70 6.3.9 Programmed Model Variant Display Initial Requirements Turn the selector switch to “O” A

Novotronic Models Technical Information 71 6.3.10 Electronic Version - Display Initial requirements Turn the selector switch to “O” Ac

Novotronic Models Technical Information 72 6.3.11 Cooling Fan - Activation (Baking Speed) Hi Initial Requirements Turn the selector switch to

Novotronic Models Technical Information 73 6.3.12 Cooling Fan - Activation (Run-On Speed) Low Initial Requirements Turn the selector swi

Novotronic Models Technical Information 74 6.3.13 Convection Fan - Activation (Max Speed) Initial Requirements Turn the selector switch to “

Novotronic Models Technical Information 75 6.3.14 Convection Fan - Activation (Min Speed) Initial requirements Turn the selector switch

Novotronic Models Technical Information 76 6.3.15 Oven Lights - Activation Initial Requirements Turn the selector switch to “O” Accessing

Novotronic Models Technical Information 77 6.3.16 Display Check Initial Requirements Turn the selector switch to “O” Accessing 1. Open t

Novotronic Models Technical Information 78 6.3.17 Buzzer Activation Initial Requirements Turn the selector switch to “O” Accessing 1. Open

Novotronic Models Technical Information 79 6.3.18 Roast Probe Temperature Initial Requirements Turn the selector switch to “O” Accessing

Novotronic Models Technical Information 8 This page intentionally left blank

Novotronic Models Technical Information 80 6.3.19 Cooling Fan Activation at (Pyrolytic Cleaning) Initial Requirements Turn the selector switc

Novotronic Models Technical Information 81 6.3.20 Door Lock - Activation Initial Requirements Turn the selector switch to “O” Accessing

Novotronic Models Technical Information 82 6.3.21 Demonstration Mode - Activation Initial Requirements Turn the selector switch to “O” Acce

Novotronic Models Technical Information 83 6.3.22 Demonstration Mode - Deactivation Initial Requirements Turn the selector switch to “O”

Novotronic Models Technical Information 84 6.3.23 Fault Codes – Retrieval and Deletion Initial Requirements Turn the selector switch to “O”

Novotronic Models Technical Information 85 6.3.24 Operating Hours (Fan Heat and Auto Roast) Initial Requirements Turn the selector switch t

Novotronic Models Technical Information 86 6.3.25 Operating Hours (Convection Heating) Initial Requirements Turn the selector switch to “O”

Novotronic Models Technical Information 87 6.3.26 Operation Hours For Heating Elements Initial Requirements Turn the selector switch to “O

Novotronic Models Technical Information 88 6.3.27 Regulator Parameter Initial Requirements Turn the selector switch to “O” Accessing 1. O

Novotronic Models Technical Information 89 6.3.28 Supply Power Frequency Setting Initial Requirements Turn the selector switch to “O” Acc

Novotronic Models Technical Information 9 2.0 Installation Refer to the Installation Manual Figure 2-1: Installation M

Novotronic Models Technical Information 90 This page intentionally left blank

Novotronic Models Technical Information 91 6.4 Programming Mode 6.4.1 Programming Mode Summary Initial Requirements Turn the selector s

Novotronic Models Technical Information 92 On the H373/H387 press the “Timer” button to toggle between the available options Option Activa

Novotronic Models Technical Information 93 6.4.2 Locking Function - Off Standard setting. The selected operating mode and temperature ca

Novotronic Models Technical Information 94 6.4.3 Locking Function - On After the operating mode and temperature have been selected and the

Novotronic Models Technical Information 95 6.4.4 Oven Light Activated When Operating Mode is Selected Standard setting Initial Requiremen

Novotronic Models Technical Information 96 6.4.5 Oven Light Activated When Door is Open in All Settings The oven light is on when the door is op

Novotronic Models Technical Information 97 6.4.6 Temperature Display - Time (12 or 24 Hour Clock) Standard setting Initial Requirements

Novotronic Models Technical Information 98 6.4.7 Oven Light - Settings Standard setting With the oven in operation, the oven light turns off

Novotronic Models Technical Information 99 6.4.8 Rapid Heat - Settings Standard setting, rapid heat on. See par 3.4.5 for further informatio