Miele KM 423 Provozní pokyny stáhnout pdf (Strana 22)

Fitting instructions

The necessary connection data and

model name are located on the hob

data plate.

Ensure that these match the household

mains supply.

When contacting the Service Depart

-

ment, please quote the voltage, model

and serial numbers given on the data

plate.

Fit wall units and extractor hood be

-

fore fitting the hob, to avoid damag

-

ing the ceramic surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen

units) must be treated with 100°C

heat-resistant adhesive which will not

dissolve or distort.

This appliance must not be in-

stalled over a dishwasher, washing

machine, tumble dryer, refrigerator,

freezer or fridge-freezer. The high tem

-

peratures radiated by hobs could dam

-

age the appliance below.

If the hob is built in above an oven,

the connection cable for the hob

must be positioned in such a way that it

cannot come into contact with the oven

housing.

Due to the high temperatures radi

-

ated it is not advisable to fit a

drawer directly underneath the hob.

The hob may only be fitted above

kitchen units with fixed front panels. An

additional interim shelf should be fitted

underneath the hob.

When installing a hob there may be

a wall at the back and a wall or tall

unit at one side. On the other side there

must not be a unit or wall which stands

higher than the hob.

Due to the high temperatures radi

-

ated by the hob, it is essential that a

minimum distance of 50 mm is main

-

tained between the worktop cut-out

and

- adjacent kitchen units

(e.g. tall unit)

- the rear wall.

Installation

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Komentáře k této Příručce

Žádné komentáře