Miele KM 5993 Uživatelský manuál stáhnout pdf (Strana 57)

Solid wood and tiled worktops

a Wooden frame 7,5 mm

(to be provided on site)

e Worktop

f Hob

g Gap

As the ceramic glass and the

worktop cut-out have a certain

dimensional tolerance, gap g can

vary (min. 1 mm).

^

Make the worktop cut-out as shown

in "Building-in dimensions".

^

Fix the wooden frame a 7 mm below

the top edge of the worktop (see

diagram).

^

Feed the hob connection cable down

through the cut-out.

^

Centre the hob f in the cut-out.

^

Connect the hob to the mains.

^

Check that the hob works.

^

Seal the remaining gap g with a

silicone sealant that is heat-resistant

to at least 160 °C.

Observe the silicone sealant

manufacturer's instructions.

For granite and marble tiled

worktops, only use silicone sealant

that has been especially formulated

for granite and marble.

Flush-fitted hobs

57

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 63 64

Komentáře k této Příručce

Žádné komentáře