Miele G 7823 Uživatelský manuál stáhnout pdf (Strana 53)

Cleaning the spray arms

Waste particles can lodge in the spray

arm jets.

It is therefore important to inspect the

spray arms regularly.

Use a sharp pointed object to push

particles into the spray arm jets, and

rinse well under running water.

Remove the spray arms as follows:

Take any mobile units out of the wash

cabinet.

Spray arms in the wash cabinet:

Loosen the securing clip on the spray

arm connection and then pull the

spray arm upwards or downwards.

^ Remove the seal and the bearing and

clean them.

^ Refit the bearing and the seal.

Spray arms in mobile units/modules:

^ Turn the nut (left hand thread)

together with the spray arm

clockwise and then pull the spray

arm downwards and off.

After cleaning the spray arms screw

them back into position.

After replacing the spray arms, check

that they rotate freely.

Maintenance

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Žádné komentáře

Miele G 7823 Uživatelský manuál Strana 53